Customizing 101: A Beginner's Guide to Repainting and Kitbashing Figures

Customizing action figures is one of the most rewarding hobbies in the collecting world. With a bit of patience and some basic tools, you can transform a mass-produced figure into a one-of-a-kind piece that reflects your own vision. This guide walks you through the fundamentals of repainting and kitbashing so you can start your first project with confidence.

Why Customize Your Figures?

There are many reasons collectors pick up a paintbrush. Maybe the factory paint apps missed a detail, or perhaps your favorite character simply doesn't exist in plastic form yet. Customizing lets you fix flaws, create rare variants, and build display pieces that no one else owns. It also deepens your appreciation for sculpting, paint work, and character design once you've tried it yourself.

Essential Tools and Materials

Before you start, gather a small but well-chosen toolkit. You don't need everything at once, but these basics will cover most beginner projects:

  • Acrylic paints (model or craft acrylics work fine for beginners)
  • Fine detail brushes and a couple of larger flat brushes
  • X-acto knife for cutting and trimming
  • Flush cutters and a sharp hobby saw for kitbashing
  • Sandpaper in various grits for smoothing seams and joints
  • Primer spray (a good primer is essential for paint adhesion)
  • Matte and gloss clear coat sealants
  • Glue: super glue for hard plastics, plastic cement for soft vinyl
  • Rubbing alcohol or isopropyl for stripping factory paint if needed
  • A well-lit workspace with good ventilation

The Golden Rule: Prep Before Paint

Most beginner mistakes happen before the brush ever touches the figure. Proper preparation makes the difference between a crisp, professional-looking custom and a flaky mess.

Taking the Figure Apart

Carefully disassemble your figure where possible. Heat the joints gently with warm water or a hairdryer to soften the plastic, then pop the limbs apart. This lets you paint each piece cleanly and keeps paint from gluing joints shut. Keep track of screws and small parts in a container so nothing disappears.

Stripping and Priming

If you want a blank canvas, soak the parts in isopropyl alcohol to remove factory paint, then scrub with an old toothbrush. Once clean, apply a light, even coat of primer. Primer gives your acrylics something to grip and reveals surface imperfections you may want to sand down. Two thin coats beat one thick one every time.

Repainting Techniques for Beginners

Start simple. Base coats should be applied in thin layers, allowing each to dry fully before the next. Thin your acrylics slightly with water or a medium for smoother coverage. For details like eyes, emblems, or panel lines, use your finest brush and steady your hand by resting it on a stable surface.

Drybrushing is a beginner-friendly technique for adding weathering and texture: load a brush with a tiny amount of paint, wipe most of it off on a paper towel, and lightly drag it over raised surfaces. Washes—diluted paint applied to recesses—are another easy way to add depth to sculpted details.

When you're satisfied, seal your work. A matte clear coat protects the paint and reduces shine, while targeted gloss coats on eyes, armor, or chrome details can add realistic contrast. Apply sealant in light layers to avoid fogging.

Kitbashing: Building Something New

Kitbashing means combining parts from multiple figures to create a hybrid character. It's how many customizers make figures that manufacturers never produced. The process is straightforward in concept: select donor figures whose parts match your vision, cut the parts you need, and assemble them onto a base body.

A few tips for success:

  1. Choose donor figures with compatible joint systems so parts fit together naturally.
  2. Cut slowly and from multiple angles—measure twice, cut once.
  3. Test-fit every part before gluing anything permanently.
  4. Fill gaps with epoxy putty, then sand smooth before priming.
  5. Repaint the finished hybrid as a unified whole so it doesn't look like a mashup.

Learn, Practice, and Share

Your first custom probably won't be perfect, and that's fine. Every project teaches you something about paint consistency, joint handling, or sculpting. Start with a cheap figure you won't miss if things go wrong, and keep photos of your progress so you can see how far you've come. Online customizing communities are generous with advice, tutorials, and honest feedback. Most importantly, have fun with it—customizing is about creating something uniquely yours, one thin coat of paint at a time.

Related reading